Bodywork begins!  I'm starting with the firewall.

It warped quite a bit during the media blasting, so I need to tweak it to fit.

I need to redo this area, I'm not happy with the inconsistency of the gap between the firewall insert and the firewall.

This area isn't supported by bolts because I already cut them off during the firewall modification.  I need to clamp it tight while the glue cures, otherwise it will cure with this gap.

I made a little clamp.  I tacked this part to the body:

Then I made this wacky thing so I can clamp the firewall tight against the body.

Nice tight fit!