Wednesday, November 30, 2016

After a few months away from blogging, I'm back!  Check the next page, I made a few updates tonight.

Back to my lower control arms, I finally got the metal work finished!  Some of this work has been done for weeks and I'm just getting around to posting it, but I busted my ass this weekend and finally got them finished.

When I left off, I had just finished the jig to form the curve around the swaybar mounting points on the rear lower control arms.

After a considerable amount of fuckery with the air hammer, they were roughed in to shape.

Not perfect, but they're close enough to tweak into final position by hand with hammers.

After adjustments and trimming, I MIG welded it in place.  I TIG welded some of the rear arms to get some practice, but I decided to MIG these to save a bit of time.

Here is a nice step-by-step of the process.  The 'before' arm on the right, the hammerformed piece, the hammerform itself, and the finished product on the left!

Another angle to show the compound curvature.


Instagram angle

At this point I took a break to TIG weld the remaining portions of the 2nd front arm.

Not perfect by any means, but this was the perfect opportunity to get a few feet of practice welding in.

I also finished welding and blending some unused holes in the front arms.


Grinding forever.

And with that, the front arms were finished!



Back to the rears, I'm reusing the hammerform I used on the front arms to make the curved filler around the pancake bushing.  I modified it slightly, I added two screw holes to hold it together better.  The original design, with one screw, moved a bit while hammering.



The arms I'm using for the rear, which are actually MK2 Golf/Jetta front lower control arms, had a lot of random notches formed in the edges.  I decided to hammer them all smooth before forming filler panels.  .

Here you can see them a little more clearly...


...And here you can't!




Here was another spot before...


And a little before/after for comparison.


Pro tip: keep the worn down cutting discs around, sometimes they come in handy to make cuts in tight areas.

I skipped a few photos, but I followed the same steps as the front: bending 1-1/4" tubing, cutting it to fit each curve, and trimming away the excess.

Welding forever.

The curve on the leading edge of the arms is more subtle, so sharp bends from a bender wouldn't work.  I cut the edge of a tube to weaken it, then formed it with hammers to match the gentle curvature.

Metabo Super Slicers are the best.

Trimmed and ready for welding


I also followed the same procedure as the fronts on filling the subframe bolt access holes: open up the bore with a carbide burr, trim a piece of 2" tubing to length, and welded in place.


All welded up!

I had the full arsenal out in force to finish all these welds.





A few hours of grinding later, and the metal work is complete!  I pressed out the aluminum plugs I was using to keep the holes round and snapped a few photos.  They're not perfectly metal finished, they will require some bodywork before paint, but I'm happy with the results.












And with that they're off! I'm having them re-blasted and coated in epoxy primer by a local shop.

Sorry for the lack of updates, I'm back!

I'm going to start with a few car-related field trips from the last few months.

I had the chance to visit Snyder Specialty Cars in Ohio with Jimmy, Jason, and the Bradfordwoods Motor Club.


I've studied this language.



I don't know a whole lot about anything here, but it was all pretty rad.




Jimmy immediately found the nicest jack stands in the place.

This was one of the oldest cars in the collection.

This Ford Model T Limosine was apparently one of one and valued at over 7 figures,

Complete with a chandelier!

Jason was quick to point out any wackiness in these old cars.

Pretty wacky.

These guys made their money with a very successful pre-war Ford parts business, so naturally most of the collection was made up of beautifully restored pre-war Fords.

The other half of the collection was 60s era drag cars!

Many of these were historically significant, though I know nothing about most of them.

There were a handful of super early bikes in the mix too.



All of the letters were hand painted... no decals here!




Metal flake for days

Murica.

Not to be confused with Larry Larson of current drag racing fame.

I think this was a replica, but badass nonetheless.

This thing was pretty rad.

Ghost flames!


This was another type of 'factory lightweight' car that they seemed to have a lot of.


Ain't nothin' lighter than a hole.


A couple NASCARs in the mix.

Such a crazy mix!


Meaty.


I found this in the bathroom.  I finally found a Snap-on tool I don't own! I need to bother Snap-on Dan and get one of these.

Alright this is just over the top.


They also had an on-site complete restoration shop.

As we were leaving, the Model A club showed up.  These fuckers drove in the rain for their tour!

Back at Jimmy's afterward, we got into some shenanigans modifying office chairs because we're adults.  Lathe - Jason style.


A few weeks later, I had the chance tour Coastal Pet Products with a group of students from school.  We couldn't take any pictures of their operations, but we got a personal tour of the 'trophy room.'  The owners of the company also own the Pittsburgh International Race Complex and are avid race fans.  They run a pair of Vipers.  They're also into big game hunting. 



The guns were actually video game controllers for a hunting game that folds down from the ceiling.

These cars are the real deal.  No amateur shit here.


Fuck.

I also took another visit to Fort Pitt Classic Cars where they're working on an LS-swapped '55 Studebaker pickup.  They're building the truck on a No Limit Engineering chassis, and I may be getting involved at some point.  But for now I'm just spectating!



It looks like they have a good amount of work left!